Skip to content

    Disposable Cameras: Automated Disassembly for Recycling at 1.5 Seconds per Part

    A cutting and SCARA robot line opens disposable cameras, removes and sorts eight components for recycling, and sends the housings to be crushed, one camera every 1.5 seconds.

    SOLUTION BY IA_Favicon_Pos
    PUBLISHED

    Challenges

    01

    Sealed cameras that have to be opened without damaging what’s inside

    02

    Eight different components to remove and collect separately

    03

    Parts that are easy to mar or crack during handling

    04

    Flash units that have to be confirmed removed

    05

    High volume that called for a very short cycle

    Results

    image (35)
    Timer-outline

    One camera disassembled every 1.5 seconds

    Wrench

    Eight components removed and collected separately

    focus

    Every flash unit removal verified by vision

    check

    Housings sent straight to a crusher

    Box

    Trays stacked and staged for AGV pickup

    Ruler

    Delrin grippers and fixtures to protect parts from marring

    A consumer products company needed to recover and recycle the key components inside its disposable cameras. Each camera is sealed, packed with small parts, and built to be used once. Taking them apart by hand at volume wasn’t practical, and every component had to come out clean enough to reuse or recycle.

    Integrion built a disassembly line that handles the whole job. An operator loads cameras onto a conveyor. A servo-controlled rotary cutter opens the bottom seal, and a CO2 laser cuts the top seal. A SCARA robot then places each camera on a precision link indexing conveyor.

    From there, eight SCARA pick and place stations each remove and collect one component. The flash unit and mechanical unit go to a fixtured indexing conveyor, and a servo gantry places them into trays. Vision verifies every flash unit has been removed before the camera moves on. Finished trays go to a tray stacker with an AGV interface dock, so full trays are ready for pickup without anyone carrying them.

    What’s left, the main and back housings, gets picked and placed onto a conveyor that feeds a crusher. Throughout the line, Delrin grippers and fixture inserts hold the parts without scratching or marring them.

    The result is a camera disassembled every 1.5 seconds, with eight components sorted and the housings ready for recycling.

    › Application

    Automated disassembly for recovery and recycling

    Cutting, pick and place, and vision checks can take a product apart as reliably as they put one together. Tell us what you need to recover and we’ll show you how.

    image (33)
    › Industry

    Automation for general industrial manufacturers

    High-volume, high-mix small parts handling is core general industrial work. See how we build systems around it.

    image (33)