A consumer products company needed to recover and recycle the key components inside its disposable cameras. Each camera is sealed, packed with small parts, and built to be used once. Taking them apart by hand at volume wasn’t practical, and every component had to come out clean enough to reuse or recycle.
Integrion built a disassembly line that handles the whole job. An operator loads cameras onto a conveyor. A servo-controlled rotary cutter opens the bottom seal, and a CO2 laser cuts the top seal. A SCARA robot then places each camera on a precision link indexing conveyor.
From there, eight SCARA pick and place stations each remove and collect one component. The flash unit and mechanical unit go to a fixtured indexing conveyor, and a servo gantry places them into trays. Vision verifies every flash unit has been removed before the camera moves on. Finished trays go to a tray stacker with an AGV interface dock, so full trays are ready for pickup without anyone carrying them.
What’s left, the main and back housings, gets picked and placed onto a conveyor that feeds a crusher. Throughout the line, Delrin grippers and fixture inserts hold the parts without scratching or marring them.
The result is a camera disassembled every 1.5 seconds, with eight components sorted and the housings ready for recycling.